Chamfering Machines,Electric Nibbler

Product material

TCT annular cutter/hole Cutters/Steel drill

If you are interested in this product, you can Product Name: TCT annular cutter/hole Cutters/Steel drill
Product Type: Ø14-150
Products Exhibitors: 其它品牌
Concern Index:21485
Product Documentation: No Related Documents

Brief

The TCT annular cutter/hole Cutters/Steel drill can punch normal and overlapping holes for 50 MM thick steel plate in high speed and accuracy.3-edge structure(made up of outer, mid and inner edges)

TCT annular cutter/hole Cutters/Steel drill

   Detailed description of
The TCT annular cutter/hole Cutters/Steel drill can punch normal and overlapping holes for 50 MM thick steel plate in high speed and accuracy. The 3-edge structure(made up of outer, mid and inner edges), unequal division in pitch and the special hard alloy blade are resulting from the unique technology of LH.Each edge bears only 1/3 workload and equips with cutter in its inner part, that makes chip removing smoothly and avoids chipping efficiently. The core drill is made of hard alloy. With the advantages of good abrasion and hard resistance, high anti-impact intensity, long lifetime, high efficiency(23 times efficiency of the common bit), the bit is suited for not only various imported magnetic drills, but also various drilling machines. Only 15-20 seconds is needed for drilling in a 25mm thick plate and once for 2000 holes without grinding during operation. Compared to common twist drill, it is more efficient (about 810 times). All the fact proves that the annular cutter is the best one in present drilling field.
 
T.C.T annular cutter with weldon shank
 
The edge is made of hard alloy
Geometric design of three terminal gears, efficient cutting, long lifetime.
Suited for various vertical drilling machines, radial drilling machines, milling machines, lathes and so on.
Bit diameter: φ14 ~ 150 mm (inner diameter), special specifications((35,50,75,100 depth) can be made by request.
Internal diameter: 6 mm or 8 mm
T.C.T annular cutter with one-touch shank
 
The edge is made of hard alloy
Geometric design of three terminal gears, efficient cutting, long lifetime.
Suited for various vertical drilling machines, radial drilling machines, milling machines, lathes and so on.
Bit diameter: φ14 ~ 150 mm (inner diameter), special specifications((35,50,75,100 depth) can be made by request.
Internal diameter: 6 mm or 8 mm
 
T.C.T annular cutter with Quick-In shank
 
The edge is made of hard alloy
Geometric design of three terminal gears, efficient cutting, long lifetime.
Suited for various vertical drilling machines, radial drilling machines, milling machines, lathes and so on.
Bit diameter: φ14 ~ 150 mm (inner diameter), special specifications((35,50,75,100 depth) can be made by request.
Internal diameter: 6 mm or 8 mm
 
T.C.T annular cutter with Quick-In shank
 
The edge is made of hard alloy
Geometric design of three terminal gears, efficient cutting, long lifetime.
Suited for various vertical drilling machines, radial drilling machines, milling machines, lathes and so on.
Bit diameter: φ14 ~ 150 mm (inner diameter), special specifications((35,50,75,100 depth) can be made by request.
Internal diameter: 6 mm or 8 mm

              
Leave a message for product
Title
Contact
Tel
Content
Verify Code
Click to change
Note:1. Shortcut key for send message :Alt+s or Ctrl+Enter!
2. If necessary, please leave your detail contact!

Copyright© 2003-2018  Plate Beveling Machines MAGNETIC DRILLS CO.,LTD  All rights reserved   Tel :+86 731 84460468 +86 731 84450538 Fax:+86 731 84450868 Address:No.143 JieFang West Road ,ChangSha , HuNan , China. PostCode: